Lift Lotion (10 Packets x 1ml)
Lift Lotion (10 Packets x 1ml)
Lift Lotion (10 Packets x 1ml)

Lift Lotion (10 Packets x 1ml)

$35.00



  • DESCRIPTION
  • DIRECTIONS
  • SHELF LIFE & STORAGE
  • INGREDIENTS
  • SAFETY DATA SHEETS

INDUSTRY'S FASTEST LASH LIFT SYSTEM

A revolutionary Lash Lift System that is fast and effective. Cuts appointment times by 70% compared to traditional Lash Lift & Tint Systems, and produces the perfect lift every time. 


Instant Lash Lift is a 3-Step System designed to Lift, Condition and Repair, resulting in healthy and lifted lashes.


Lift Lotion is a Thioglycolic Acid based Alkaline Lift Lotion.

Set x Tint Lotion is a Hydrogen Peroxide based 2-in-1 Set Lotion & Tint Oxidant.

24 Karat Glaze is a 𝙥𝙤𝙬𝙚𝙧𝙝𝙤𝙪𝙨𝙚 𝙘𝙤𝙘𝙠𝙩𝙖𝙞𝙡 made of Vitamin E, Ceramides, Hyaluronic Acid, Peptides, and of course, 24K Gold! It instantly restores and nourishes the lashes, so they’re plump and soft.

Keratin Sealant is a Keratin infused Conditioning Treatment that seals lashes.


PROCESSING TIME

3 Minutes for Fine Lashes 

4 Minutes for Medium Lashes 

5 Minutes for Thick Lashes 

6-7 Minutes for Very Thick Lashes


LASH LIFT & TINT

STEP 1: LIFT

- Apply the Lift Lotion from the base up to the middle of the lashes.
- Allow to process for the recommended amount of time.
- Remove Lift Lotion using a dry wand.



STEP 2: SET & TINT

- Mix equal amounts of Set & Tint Lotion with Tint Color (such as Refectocil). No oxidant is needed.
- Apply the mixture from the base up to the the tips of the lash - the entire lash should be covered. This will not damage the lashes.
- Apply plastic wrap on top of the lashes to prevent mixture from drying out. (If the product dries out, it will stop processing)
- Allow to process for the same amount of time as the Lift Lotion. Process an additional 1-2 minutes for a more vibrant tint.
- Remove mixture using a dry wand.
- Remove lashes from the shield using a damp cotton pad. Ensure to remove all product residue.
- Remove the shield from the eyelids.
- Remove any remaining residue with a damp cotton pad.
- Rinse the lashes with water to remove all product residue. This will not affect the lift results.



STEP 3: CONDITION

- Apply 24 Karat Glaze on lashes. This will condition, soften and plump the lashes. Do not rinse.
- Wait 30 seconds.
- Apply Keratin Sealant after applying 24 Karat Glaze. This will fill the lashes with keratin to strengthen from inside out. Do not rinse.


LASH LIFT (NO TINT)

STEP 1: LIFT

- Apply the Lift Lotion from the base up to the middle of the lashes.
- Allow to process for the recommended amount of time.
- Remove Lift Lotion using a dry wand.


STEP 2: SET

- Apply the Set & Tint Lotion from the base up to the the tips of the lash - the entire lash should be covered. This will not damage the lashes.
- Allow to process for the same amount of time as the Lift Lotion.
- Remove Set Lotion using a dry wand.
- Remove lashes from the shield using a damp cotton pad. Ensure to remove all product residue.
- Remove the shield from the eyelids.
- Remove any remaining residue with a damp cotton pad.
- Rinse the lashes with water to remove all product residue. This will not affect the lift results.



STEP 3: CONDITION

- Apply 24 Karat Glaze on lashes. This will condition, soften and plump the lashes. Do not rinse.
- Wait 30 seconds.
- Apply Keratin Sealant after applying 24 Karat Glaze. This will fill the lashes with keratin to strengthen from inside out. Do not rinse.


LIFT LOTION

UNOPENED: Refer to expiry date on the back of the sachet (bottom)

STORAGE: Store at room temperature, away from heat and sunlight.


OPENED: 24 Hours

STORAGE: Store in an air tight container, such as a Ziplock bag. Store at room temperature, away from heat and sunlight.


LIFT LOTION

Water, Ethanolamine, Thioglycolic Acid, 1-Hexadecanol, Polyquaternium-28, Steartriumonium Chloride, C12-15 Pareth-10, Urea, Glycerin, Glyceryl Stearate, Perfume, Ethylened-Iaminetetraacetic Acid, Disodium Salt. 


LIFT LOTION