Preparation
Before opening, gently massage the Set x Tint sachet to ensure the lotion is well mixed and warmed up to room temperature for optimal performance.
Open Sachet
Each packet contains enough product for 2-3 services. To extend usability & maintain effectiveness, carefully poke a small hole in the sachet or cut a very small opening at the top of the packet. This reduces exposure to oxygen, preventing the lotion from oxidation and becoming less effective.
Dispense and Seal
Dispense the amount needed for a single service. Immediately after dispensing, seal the opening with silicone tape to prevent any leaks.
Mix Set x Tint with Tint Color
Mix equal amounts of Set x Tint Lotion with your favorite tint color (note: do not add your developer to this mixture).
Apply and Process
Apply the mixed lotion onto the entire lash, from base to tip. Allow the mixture to process, adjusting the time based on the thickness of the lashes.
Remove
After the processing time is complete, thoroughly remove the solution and rinse the lashes.
Condition
Proceed with desired lash treatment: “24 Karat Glaze + Keratin Sealant Duo” OR Power Gloss.
Tip
Ensure there is a sufficient amount of mixture on the lashes. Cover with lift paper during the process to prevent the lotion from drying out, achieving optimal results. Process for an additional 2-3 minutes for a more vibrant tint.
Set x Tint Processing Time
3 Minutes for Fine Lashes
4 Minutes for Medium Lashes
5 Minutes for Thick Lashes
6-7 Minutes for Very Thick Lashes